Search by product

Search by product

Stanley has variation of "Light".
We provide the best solutions with many product categories.

Water Sterilization Unit

The Stanley Electric launches "UV-CCL reactor" for sterilizing flowing water.
It uses the Stanley's UV cold cathode lamp (UV-CCL) which adopts original metal cup electrodes. The characteristics are anti vibration and long lifetime. Even though the lamp repeats ON and OFF, the life time doesn't change and the life time keeps 20,000 hours. It able to reduce exchange frequency and easy to maintain.

photo

UV-CCL Reactor

Part Name US/50F274/R2 US/30F150/R3 Notes
Standard reference data sheet Drawing > Drawing >  
Size Outer diamter(Φ) 50 30  
Length(mm) 274 150  
Water folow rate(L/min) 2~6 1~2 As a measure to achieve an inactivation rate of Escherichia coli of 99.9% and more. Flow rate should be set appropriately to each customer's system depending on actual effect with existing piping.
Maximum working pressure(MPa) 0.875 0.875 Operating pressure
Pressure value(MPa) 1.75 MIN 1.75 MIN Hydrostatic pressure/Pressure test are conducted based on JIS S3200-1
Operating temperature(℃) 4~40 4~40 Ambient temp. and raw water temp.
Wattage(W) (6.6) (6.7)  
Product life time(h) 20,000 MIN 20,000 MIN  
Body material Compatible SUS304 Compatible SUS304 Surface of the body is buffed finish #400.
Vacant weight(g) (353) (180) Not included with INV
Operating weight(full water)(g) (760) (222) Not included with INV
The first raw water   The water should be complied with a water quality satandard of water and sewerage. The water should be satisfied with a range of residual chlorine concentrantion and chloride ion concentration. The water that is calibrated/certified by the regional public health center.
Chloride ion concentration(mg/L) Less than 20 Less than 1 Raw water SPEC
Water joint size(inch) Rc 1/4 Rc 1/8  

Inverter

Inverters are also available for those who use our UV-CCL(L:240mm). Basically UV-CCL reactor and inverter are sold as a set.

Part Name UVI/K0027A Notes
Standard reference data sheet Drawing > *When OPEN abberrance or SHORT abberrance are happened, it sends an error signal.
*It is able to control the turning on / off of the lamp by dedicated ON/OFF terminal, aside from input voltage terminal.
Size(L×W×H)(mm) 42.6×114.3×23
Weight(g) (55)
Inverter electrical characteristics Input voltage Min 21.6V
Typ 24V
Max 26.4V
Input current Min
Typ 280mA
Max 380mA
Open circuit voltage Min. 1500V

We also offer 150mm type and 70mm type. Click here for more info >

Precautions for water sterilization reactor

warning :



Notes :



When using the reactor in landscape orientation :

  1. Please install it with water passage upward against the ground.
    ⇒It's the best way to obtain the max sterilization power. If installing it in a wrong way, the water will flow in a different way, which will cause less sterilization power.
  2. You can put the lamp on by inputting DC24V to the inverter.
  3. We recommend that you wait at least 1 minute after the lamp is lit before using.
  4. Please install the inverter on the top of the reactor so that dew condensation water will not be transmitted.


When using the product in portrait orientation :

  1. When installing this product vertically, please insert water from the lower water passage.
    ⇒It's the best way for getting max sterilization power. If you install it in other ways, sterilization power will get lower.
  2. You can put the lamp on by inputting DC24V to the inverter.
  3. We recommend that you wait at least 1 minute after the lamp is lit before using.
  4. Please install the inverter on the top of the reactor so that dew condensation water will not be transmitted.
UV water disinfection reactor application

Product inquiry